Kyocera ECOSYS P3050dn ECOSYS P3045dn/P3050dn/P3055dn/P3060dn Operation Guide - Page 66
Loading Paper into the MP (Multi-Purpose) Tray
View all Kyocera ECOSYS P3050dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Preparation before Use Loading Paper into the MP (Multi-Purpose) Tray The multi purpose tray will hold up to 100 sheets of A4 plain paper (80 g/m²). For details of the supported paper sizes, refer to Selecting the Right Paper on page A-13. For the paper type setting, refer to Media Type (Paper type setting for the MP tray) on page 4-31. IMPORTANT When using media types other than plain paper (such as recycled paper), always specify the media type setting. If you are using a paper weight of 106 g/m² or more, set the media type to Thick and set the weight of the paper you are using. The capacity of the multi purpose tray is as follows. • A4 plain paper (80 g/m²): 100 sheets • Hagaki: 1 sheet • Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6, Envelope Monarch, Youkei 4, Youkei 2: 5 sheets • Folio: 20 sheets • Thick paper: 5 sheets Note When you load custom size paper, select Custom size by referring to Paper Size (Paper size setting for the MP tray) on page 4-30. When you use special paper such as envelopes or thick paper, select the media type by referring to Media Type (Paper type setting for the MP tray) on page 4-31. 1 Fan the media (paper/transparencies), then tap it on a level surface to avoid media jams or skewed printing. MP Tray 2 Pull the MP tray towards you until it stops. 2-42