Kyocera ECOSYS P6021cdn ECOSYS P6021cdn/P6026cdn Type B Operation Guide - Page 107
When the Paper Runs Out During Printing, Duplex (Duplex printing)
View all Kyocera ECOSYS P6021cdn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Using the Operation Panel When the Paper Runs Out During Printing When Paper Feed Mode is set to Fixed, if the paper in the cassette runs out during printing, Load Cassette 1 is displayed and the printer stands by. In this event, either replenish the paper in the empty cassette or use the procedure below to print from another paper source. 1 While Load Cassette 1 is displayed, press or repeatedly until Use alternative? appears. 2 Press or repeatedly until the desired paper source and size appears. Each time you press or , another paper cassette or the paper size that can currently be fed from the MP tray appears. 3 Press [OK]. Printing continues. Duplex (Duplex printing) Using the duplexer, you can automatically print on both sides of the paper. The duplexer is mounted underneath the printer. Duplex printing is available for the following paper types: PLAIN PREPRINTED BOND RECYCLED ROUGH LETTERHEAD COLOR PREPUNCHED THICK HIGH QUALITY Activating the duplexer is done by selecting either short edge or long edge binding mode. Note Duplex printing can be also performed from the MP tray. If the paper to be fed from the MP tray does not match the paper size and paper type of the current paper feed source cassette, a paper jam may occur. IMPORTANT Duplex printing for coated paper (COATED) is possible if the optional paper feeder PF-530 is installed. 4-39