Kyocera FS-1350DN FS-1350DN Operation Guide Rev-1 (Advanced) - Page 89
Expansion Memory Modules
View all Kyocera FS-1350DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Expansion Memory Modules To expand the printer memory for more complex print jobs and faster print speed, you can plug in optional memory module (dual in line memory module) in the memory slot provided on the printer main controller board. You can select additional memory module from 128, 256, 512, or 1024 MB. The maximum memory size is 1152 MB. Note The expansion memory should only be installed by your service technician. We shall not be liable for any damages caused by improper installation of expansion memory. Precautions for Handling the Printer's Main Controller Board and Memory Module To protect electronic parts, discharge static electricity from your body by touching a water pipe (faucet) or other large metal object before handling the memory module. Or, wear an antistatic wrist strap, if possible, when you install the memory module. Always hold the main controller board or a memory module by its edges as shown below to avoid damaging electronic parts. Correct Incorrect Installing the Memory Module 1 Turn off the printer and disconnect the power cord and printer cable. 2 Remove the right cover with a piece of metal similar to coin. Option 3-3