Kyocera FS-1350DN FS-1350DN Operation Guide Rev-1 (Advanced) - Page 90
Removing a Memory Module, Verifying the expanded memory, CAUTION
![]() |
View all Kyocera FS-1350DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
3 Remove the fixing tape in case of the first installation. Then, remove the memory slot cover as shown in the figure. 4 Remove the memory module from its package. 5 Aligning the cutouts of the memory module with the matching keys of the socket, carefully plug the memory module into the memory socket until it clicks in place. Then, push down the memory module to secure. CAUTION Before inserting a memory module in the printer, make sure that the printer is switched off. 6 Push down the memory module to secure. 7 Reinstall the memory slot cover and the right cover. Removing a Memory Module To remove a memory module, remove the right cover and the memory slot cover from the printer. Then, carefully push out the two socket clamps. Ease the memory module out of the socket to remove. Verifying the expanded memory To verify that the memory module is working properly, test it by printing a status page. 3-4 Option
![](/manual_guide/products/kyocera-fs1350dn-fs1350dn-operation-guide-rev1-advanced-8381f11/90.png)