Kyocera KM-2020 Installation Guide - Page 20

Local Device Agent 2 Verify that Status Monitor is disabled. a) In Windows, run Task Manager. b) From any application, send a print job. You can send a print job with a blank page. c) After sending a print job, go to Task Manager, and make sure that Status Monitor does not appear in Processes > Apps. If disabled, then the Status Monitor window does not appear. If the window appears, then go to Settings > Notifications, and then disable event notification. Installing LDA In each host computer with a USB-connected device, do the following: 1 In Device Manager, go to Devices > List > More > Download the local agent. 2 Save and extract the package. 3 Run the installer. You may need to allow the installer to make changes to your computer. 4 Review or modify the Destination folder, and then select Next. 5 Confirm the settings, and then select Install. 6 Review the results, and then select Close. 7 Make sure that LDA is running. In Task Manager, go to Processes > Background processes, and then search for LDAService. Discovering USB-connected devices After installing LDA in host computers with USB-connected devices, you can add these devices in Device Manager. Before adding a USB-connected device, make sure that: • Status Monitor is disabled in the host computer. • You have the IP address or host name of the host computer. • The device is not in sleep mode. 1 In Device Manager, go to Devices > List > Add devices > Add devices now. 2 In Discovery mode, select By IP address or host name. 3 In Target, specify the IP address or host name of the computer with the USB- connected device. 4-2 Installation and Upgrade Guide