Kyocera KM-2550 1650/2050/2550 Operation Guide Rev-4 (Basic) - Page 104
After you use the grid cleaner to clean the electrical charge the machine can be used again
View all Kyocera KM-2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Maintenance 11 (16/20 ppm model) While holding gently the grid cleaner with your left hand, pull out the electrical charge section as far as it will go and push it back until the portion B does not touch the white pad of the grid cleaner. B Repeat this operation several times. (25 ppm model) While holding gently the grid cleaner with your left hand, pull out the electrical charge section as far as it will go and push it back until the roller C does not touch the white pad of the grid cleaner. C Repeat this operation several times. Important! 12 When pushing back the electrical charge section, do not push it all the way into the main body. Copying trouble may occur. When the electrical charge section is pulled out approximately 5 cm (2 inches), remove the grid cleaner and then push back the electrical charge section all the way into the main body. Important! 13 After you use the grid cleaner to clean the electrical charge section, the machine can be used again after more than 5 minutes have elapsed. Hold the new toner container vertically and tap the upper part five times or more. Turn the toner container upside down and tap the upper part five times or more. 14 Shake the toner container up and down five times or more. Turn the toner container upside down and shake it five times or more. 5-8