Kyocera KM-2550 1650/2050/2550 Operation Guide Rev-4 (Basic) - Page 49
Registering the Subnet Mask
View all Kyocera KM-2550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Preparations 14 Use the numeric keys to input the IP address. Enter the first block of 3 digits of the address in the highlighted IP Address area. 0. 0. 0. 0 15 Press the # key. 16 Enter the next block of 3 digits of the address in the highlighted area. IP Address 10 . 0 . 0 . 0 17 Continue the same procedure for the other 2 blocks. 18 Press the Enter key. Next, set the subnet mask. Registering the Subnet Mask To register the subnet mask, continue the procedure from step 18 above. 1 Press the S key or the T key to select Subnet Mask. TCP/IP Setting DHCP IP Address Subnet Mask 2 Press the Enter key. 3 Use the same procedure as steps 14 to 17 of IP address setting to input the address. Subnet Mask 0. 0. 0. 0 2-17
Preparations
2-17
14
Use the numeric keys to input the IP address. Enter the
first block of 3 digits of the address in the highlighted
area.
15
Press the
#
key.
16
Enter the next block of 3 digits of the address in the
highlighted area.
17
Continue the same procedure for the other 2 blocks.
18
Press the
Enter
key.
Next, set the subnet mask.
Registering the Subnet Mask
To register the subnet mask, continue the procedure from step 18 above.
1
Press the
key or the
key to select
Subnet Mask
.
2
Press the
Enter
key.
3
Use the same procedure as steps 14 to 17 of IP
address setting to input the address.
IP Address
0
0
.
.
0
0.
IP Address
10
0
.
.
0
0
.
DHCP
IP Address
TCP/IP Setting
Subnet Mask
Subnet Mask
0
0
.
.
0
0.