Kyocera KM-3060 Fax System (M) Operation Guide Rev-2.0 - Page 103
Changing/Deleting a Forwarding Settings (for Each Requirement), Cancelling the Forwarding Settings
View all Kyocera KM-3060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
FAX Operation (Advanced) 30 To exit from this setup, press [Close] several times until the System Menu default screen is displayed. Changing/Deleting a Forwarding Settings (for Each Requirement) To change or delete a forwarding setting, follow the steps below. 1 Follow steps 1 to 3 of Registration of Forwarding Settings (for Each Requirement) on page 5-15. 2 Select the requirement name to be deleted or changed. To delete the requirement name, go to the next step. To change the requirement name, go to step 4. 3 Press [Delete]. When the confirmation screen is displayed, press [Yes] and go to step 6. 4 Press [Detail/Edit]. 5 Change the forwarding settings referring to steps 5 to 21 of Registration of Forwarding Settings (for Each Requirement) on page 5-15. 6 When the deletion or change is completed, press [OK]. 7 To exit from this setup, press [Close] several times until the System Menu default screen is displayed. Cancelling the Forwarding Settings To cancel the memory forwarding, follow the steps below. 1 Press the System Menu key. 2 Press [FAX] and then [Change] of Forward Setting. 3 Press [Off] and then [OK]. 4 To exit from this setup, press [Close] several times until the System Menu default screen is displayed. Forwarding Detail Settings With the forwarding settings, you can change the following detail settings. Enable Time Setting Register the times when the preset requirements become enabled and disabled. 1 Follow steps 1 to 3 of Registration of Forwarding Settings (Forward All) on page 5-13. OPERATION GUIDE 5-19