Kyocera KM-3060 Fax System (M) Operation Guide Rev-2.0 - Page 69
Delayed Transmission, IMPORTANT, Batch Transmission Function
View all Kyocera KM-3060 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
FAX Operation (Application) Delayed Transmission When you have set a transmission start time, this function automatically sends originals at the preset time. You can use delayed transmission together with the broadcast transmission function, etc. The method for sending originals to one destination after setting the start time is explained here. IMPORTANT: If the current time displayed on the touch panel is not correct, you cannot send originals correctly at the preset time. In this case, adjust the time. For details, refer to Date and Time Entry on page 2-7. NOTE: You cannot select direct transmission. Set the time from between 00:00 and 23:59 in one-minute increments. Together with standby transmission and interrupt send, you can set up to 200 destinations for delayed transmission. When two or more delayed transmissions are set for the same time, the communication will start in the order that the delayed transmissions have been set. When delayed transmissions have been set in reverse order, however, sending of originals to be sent to the same destination is prioritized over the ones to be sent to different destinations. You can cancel a delayed transmission any time before the specified transmission time. You can also send a delayed transmission before the specified time. (Refer to Cancelling and Sending Delayed Transmissions (Queued) on page 3-14.) If you use delayed transmission when sending documents stored in the Custom Box by fax, you cannot move documents until sending is finished. For details on using Custom Boxes, refer to the machine's Operation Guide. Batch Transmission Function When fax originals to be sent to the same destination are set to the same transmission start time with delayed transmission, you can send up to 10 groups of originals using batch transmission. This function prevents repeated communication to the same destination and reduces the communication cost. OPERATION GUIDE 4-3