Kyocera KM-3530 2530/3530/4030 Operation Guide Rev 2C - Page 31
Interrupt copying
![]() |
View all Kyocera KM-3530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
4 Touch the [+] key or [-] key to set the zoom ratio for the vertical and/or horizontal direction. The numeric keys can also be used by touching the [# keys] key. Inch specifications CHAPTER 4 BASIC OPERATION 3. Interrupt copying Interrupt copying is useful if, during one copy job, other originals need to be copied at different settings. The interrupted copy job can be resumed at the same settings as before after the rush job is finished. Metric specifications 5 Check the direction of the original top side. 6 Copying will start when the [Start] key is pressed. 1 2 3A 1 2A3 1 Press the [Interrupt] key to light the indicator. The "Interrupt mode OK." screen will appear. Management Interrupt Energy Saver → 2 3 Reset 56 Stop/ Clear 2 Remove the present original(s) and put it (them) aside. 3 Set the new original(s) and execute copying. 4 When copying ends, press the [Interrupt] key again, and replace the newly copied original(s) with the one(s) removed before. Then, press the [Start] key. The interrupted copy job will be resumed. Management Interrupt Energy Saver → 2 3 Reset 56 Stop/ Clear 4-7
![](/manual_guide/products/kyocera-km2530-253035304030-operation-guide-rev-2c-4273ab4/31.png)