Kyocera KM-4035 Scan System Operation Guide (Functions Edition) Rev-9 - Page 62
Set up] - [Network], Host Name, IP Address
![]() |
View all Kyocera KM-4035 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
System Setting [Set up] - [Network] • Host Name Register the host name of the scanner (up to 32 single-byte characters) in this field. • IP Address Register the IP address of the Scanner Interface Card in this field in the following form: XXX.XXX.XXX.XXX • Subnet Mask Register the subnet mask of the Scanner Interface Card in this field in the following form: XXX.XXX.XXX.XXX • Default Gateway Register the default gateway of the Scanner Interface Card in this field in the following form: XXX.XXX.XXX.XXX • DHCP/BOOTP The DHCP and BOOTP can be set to either "ENABLE" or "DISABLE". The factory default setting is "ENABLE". • RARP The RARP can be set to either "ENABLE" or "DISABLE". The factory default setting is "ENABLE". • ARP/PING The ARP/PING can be set to either "ENABLE" or "DISABLE". The factory default setting is "ENABLE". Page 2-13
![](/manual_guide/products/kyocera-km3035-scan-operation-guide-functions-edition-rev9-b8a2d6e/62.png)