Kyocera KM-5050 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 44
FTP Status Check, DNS Server
View all Kyocera KM-5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Preparation before Use The settings to be specified in the TCP/IP settings screen are explained below. Item Host Name IP Address Subnet Mask Default Gateway DHCP/BOOTP RARP DNS Server (Primary, Secondary) Domain Name WINS Server (Primary, Secondary) Scope ID FTP Status Check Description Specifies a name for the machine system network component. This name is also used as the NetBEUI Printer Name and the SNMP sysName object. Assigns the Internet Protocol address on the machine system network component. The format of the IP Address is four-byte (32-bit) numbers separated by dots, e.g. 192.168.48.21. Specifies the subnet mask configured on the machine system network component. If the machine system does not automatically assign a usable default value and the first number in the IP address is from 192 to 254, then use 255.255.255.0 as the subnet mask. The IP address of the gateway router for the local network. Identifies how the machine obtains its IP configuration: DHCP/BOOTP: automatic configuration via a BOOTP server or a DHCP server. Automatic configuration using the Reverse Address Resolution Protocol. The IP address of the primary and secondary Domain Name System (DNS) servers. The Domain Name System (DNS) to which the machine system belongs, such as abcdnet.com. It should not include the host machine name. The IP address of the primary and secondary Windows Internet Name Service (WINS) servers. This section determines the scope of IP addresses that a Windows server can grant or lease to any requesting network component. A DHCP server processes the machine system's discovery broadcasts and returns an IP address to it. The DHCP server may be set up to grant an IP address for a limited time (a temporary lease) or for an unlimited time (an unlimited lease), or it may be configured with a permanent address reservation for the machine system. Enables or disables the FTP Status Check. 3 Click Submit. 4 After completing the settings, restart the machine to save the settings. 2-14 OPERATION GUIDE