Kyocera KM-5050 3050/4050/5050 Operation Guide Rev-3 (Basic) - Page 76
Loading Originals, Placing Originals on the Platen
View all Kyocera KM-5050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Preparation before Use Loading Originals Follow the steps below to load originals for copying, sending or storing. Placing Originals on the Platen You may place books or magazines on the platen in addition to ordinary sheet originals. 1 Open the original cover. NOTE: If the optional document processor is installed, open the document processor. Before opening the document processor, be sure that there are no originals left on the original table or on the original eject table. Originals left on the original table or on the original eject table may fall off when the document processor is opened. Keep the document processor open if the original is 40 mm or thicker. 2 Place the original. Put the scanning side facedown and align it flush against the original size indicator plates with the back left corner as the reference point. 2-46 OPERATION GUIDE