Kyocera KM-C1530 Fiery X3e Color Guide for Ver 2.0 - Page 58
Choose Yes in the Measure screen., For Calibration Mode, choose Standard or Expert.
View all Kyocera KM-C1530 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
22-24 Color Calibration 5. Use the down arrow button to scroll to Calibration. 6. Choose Set Up Calibration. If a password is set on the Fiery X3e, enter it and press OK. 7. For Calibration Mode, choose Standard or Expert. With Expert Mode, you can print a Comparison Page (see page 2-8). 8. For Measurement Method, choose AutoCal or ColorCal. 9. Choose Calibrate. 10. Select the Calibration Set. Choose from the list of all calibration sets on the Fiery X3e. This prompt appears only if more than one calibration set is available. 11. When prompted, choose Yes to print the measurement page. This page is comprised of swatches of color that will be measured by the copier's scanner and then compared to the target color values. After the page is printed, the Measure Page screen appears. 12. Choose Yes in the Measure Page screen. 13. When prompted on the Control Panel, place the Kodak Gray Scale strip face-down on the copier glass. Place the strip along the top edge of the copier so that it is centered between the paper width marks on the copier. Place grayscale strip face down Place color measurement page face down over grayscale strip