Kyocera KM-C3225E DF-710/MT-710/BF-710/PH-5A Operation Guide Rev-1 - Page 27
Tray C, Conveyor / Internal Tray, conveyor to the internal tray.
View all Kyocera KM-C3225E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Tray C If the illustration shown displays on the machine's operation panel, there is a paper jam in the conveyor section to Tray C. 1 While pushing the finisher release lever, pull the finisher out from the machine. English 2 Open the top cover and remove the jammed paper. 3 Close the top cover and re-install the finisher back into position on the machine. Conveyor / Internal Tray If the illustration shown displays on the machine's operation panel, there is a paper jam in the conveyor section to the internal tray. NOTE: If frequent jamming occurs in the conveyor or internal tray, the paper may be excessively curled. Adjust curling referring to page 31 for when output pages are curled. 1 Open the tray C and front cover. DF-710, MT-710, BF-710, PH-5A, PH-5B AND PH-5C OPERATION GUIDE 25