Kyocera KM-C3225E PRESCRIBE Commands Command Reference Manual Rev 4.8 - Page 48
Bklt
View all Kyocera KM-C3225E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
PRESCRIBE Command Reference BKLT - print in BooKLeT binding Format BKLT binding; Parameter binding: number representing binding mode: 0 = None 1 = Left-to-right binding 2 = Right-to-left binding Function The BKLT command allows printing a job as a booklet, reordering and printing the pages two-up on a sheet of paper. Booklet printing requires the hard disk to be installed in the printing system. a = First page b = Last page a a b b The job to booklet-print must be defined using the JOBS command. Used together with the FOLD command, the paper can be folded in the middle to form a booklet. Booklet printing is possible for documents of A4, A5, B5, letter, or statement size documents and are automatically printed on double size paper, namely A3, A4-R, B4, ledger, or letter-R. The original page size must be specified by the SPSZ command, for example, SPSZ 8; for A4 page size. It is also possible to reduce the original page size by commanding the second parameter for SPSZ. For example, to print two A4 pages on a A4 sheet, command SPSZ 8, 5;. For details on page size, refer to the SPSZ command page in this manual. The document must have the same page size for all pages. If the double size paper for the document is not available in the printing system, the printing system ignores the BKLT command and prints in the original paper size. Duplex printing is also possible by adding the DUPX command. To correctly arrange two neighboring pages in line, short-edge binding duplex must be used by commanding DUPX 2;. The order of print pages can be selected by binding in either of the following manners: 38