Kyocera TASKalfa 221 Fax System (R) Operation Guide - Page 188
Turning Bulk Fax Reception ON/OFF Fax bulk reception setting
View all Kyocera TASKalfa 221 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Various Settings and Registration Turning Bulk Fax Reception ON/OFF ("Fax bulk reception" setting) If this setting is turned "ON", the data for an incoming fax will be stored and then printed out in a single batch at the end of the communication. By holding the printing of an incoming multi-page fax until after its reception is fully complete, it will be possible to make copies during that reception. Notes • Even if this setting is turned "ON", if there is not enough memory to store additional image data, the machine will automatically switch to page-by-page print out. • Even if this setting is turned "ON", if either Duplex Reception or Fax Forwarding are also turned "ON", or if the machine is in the middle of a Memory Reception, those operations will be given priority. • If you want to cancel the procedure part way through, press the Reset key. The operation panel will return to the initial mode settings. 1 Press the System Menu key. 2 Press the T key to select Fax Default. System Menu / Counter Machine Default Printer Default Fax Default 3 Press the Enter key. 4 Press the S key or the T key to select Fax Bulk RX. Fax Default: Paper Feed Sel. :AutoSelect 2 in 1 RX :Off Fax Bulk RX :Off 5 Press the Enter key. 6 Press the S key or the T key to select whether to turn Bulk Fax Reception ON or OFF. Fax Bulk RX: *On The asterisk (*) in the message display indicates the Off current setting. 7 Press the Enter key. The setting for Bulk Fax Reception is complete. If you are finished making settings, press the Reset key. The operation panel will return to the initial mode settings. 7-20