Kyocera TASKalfa 250ci 250ci/300ci/400ci/500ci/552ci Operation Guide Rev-1 - Page 321
IPSec Setting, LAN Interface Setup, Default Setting System Menu, Restarting the System
View all Kyocera TASKalfa 250ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 321 highlights
Default Setting (System Menu) 4 Press [OK]. 5 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-72. IPSec Setting Sets up IPSec. The default setting is Off. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network, and then [Change] of IPSec. NOTE: If user login administration is disabled, the user authentication screen appears. Enter your login user name and password and then press [Login]. For this, you need to login with administrator privileges. Refer to Adding a User on page 11-5 for the default login user name and password. 3 Press [On]. 4 Press [OK]. 5 After changing the setting, restart the system or turn the machine OFF and then ON again. 8 For detailed information on restarting the system, refer to Restarting the System on page 8-72. LAN Interface Setup Specify the settings for the LAN interface to be used. The default setting is Auto. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Change] of LAN Interface. 3 Select [Auto], [10BASE-T Half], [10BASE-T Full], [100BASE-TX Half] or [100BASE-TX Full] as the LAN interface. 4 Press [OK]. 5 After changing the setting, restart the system or turn the machine OFF and then ON again. For detailed information on restarting the system, refer to Restarting the System on page 8-72. 8-79