Kyocera TASKalfa 3050ci Kyocera Command Center RX User Guide Rev-1.2 - Page 55
Advanced > Protocols > NetWare, End of Job String - admin login
View all Kyocera TASKalfa 3050ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Settings Pages Start of Job String Specifies the character string sent to the printer before output, directly to the output port (lp port). This character string is used when it is necessary to transmit a control code before the print data is sent. End of Job String Specifies the character string sent to the printer after output, directly to the output port (lp port). This character string is used when it is necessary to transmit a control code after the print data is sent. Advanced > Protocols > NetWare This printing system supports both NDS and bindery printing in either print server mode or remote printer mode. NetWare setup requires installation of the following client software and login with Administrator Privileges. If you are unsure, please contact your network administrator. With Novell Client, creation of the NetWare print objects with the AdminManager NetWare Setup Wizard requires the NetWare Client from Novell. For NetWare printing, you may use the NetWare Client from either Novell or Microsoft. For Admin Privileges, network operations (creating queues etc.) require 'admin' or 'supervisor' privileges (or equivalent). Certain portions of AdminManager may be inoperable if you attempt those operations without sufficient privileges. NetWare Protocol Enables or disables the Network Protocol. Bindery Mode Enables or disables Bindery Mode. Frame Type Sets the Frame type. You can choose from Auto, 802.3, Ethernet-II, SNAP or 802.2. File Server (Primary) Enter the name of the primary File Server. NDS Tree Enter the name of the NDS Tree. NDS Context Enter the NDS Context. Printer Server Mode Enables or disables Print Server Mode. Print Server Name Enter the Print Server Name. Queue Polling Interval Enter the Queue Polling Interval in seconds. Password (optional) Enter the Password, if required. Login to NetWare will be sucessful only the password set here matches the Printer Server password set within the NetWare utilities. Remote Print Mode Enables or disable Remote Print Mode. COMMAND CENTER RX 6-33