Kyocera TASKalfa 3501i 3501i/4501i/5501i Printer Driver User Guide - Page 84
Inserting Backing Sheets Between Transparencies, Index Tab Dividers, Index Tab Dividers Options
View all Kyocera TASKalfa 3501i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Publishing only available when printing on transparencies supplied from the MP tray. You can print the same content on the backing pages as on the transparencies. Transparency interleaving cannot be used together with Cover mode, Page insert, or Index tab dividers. Inserting Backing Sheets Between Transparencies You can insert backing sheets between transparencies. 1 In Basic > Media type, select Transparency. If the Source and Media type lists have been combined (by a selection in Device Settings > Compatibility Settings), Media type does not appear. Instead, in the Source list select Auto (Transparency). 2 In the Publishing tab, click the Transparency interleaving icon. 3 To print the transparency content on the inserted pages also, select the Print onto backing check box. 4 In the Media for backing list, select the Media type of the backing sheet or the Source paper cassette. When you choose the media type, a source cassette matching that media type is automatically selected. 5 Click OK to return to the Print dialog box. 6 Click OK to start printing. The printing system's operation panel prompts you to load transparencies into the MP tray, and if necessary, load backing paper into the selected cassette. Index Tab Dividers Index tab dividers inserts tab divider sheets at specified points in a print job to divide sections of a printed document. You can also print on the tabs. You can use standard tab divider sheets for A4 and Letter paper, or you can create custom tabs for those sizes. Tab divider sheets must be supplied from the MP tray so that the tabs are on the edge opposite the feeding direction, and the printing surface is down. The first tab is on the left side relative to the feed direction. Some options selected for Index tab dividers are automatically selected for Publishing > Page insert. Similarly, Page insert selections appear in the Tab Settings dialog box. Tab text can be printed on only one side of the tabs, even if the document pages are printed on both sides. The Custom Media, Tab Settings, and Custom Tab dialog boxes display the unit of measurement in inches or millimeters. You can change the Units setting in the User Settings dialog box, accessed from Device Settings. Index Tab Dividers Options The following options are available for the Index tab dividers feature in the Publishing tab. Media 9-7 User Guide