Kyocera TASKalfa 420i Fax System (S) C Operation Guide Rev-2 - Page 35
Pause], Description, Clear
View all Kyocera TASKalfa 420i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Ready to send. FAX No. Entry Pause Space Add a new FAX destination. Enter FAX number with the numeric keys. Backspace Add to Addr Book Status Next Dest. Cancel Destination Sub Address Transmission Start Speed ECM Encrypted Transmission On Hook OK 08/08/2009 10:10 Ready to send. FAX No. Entry Pause Space Add a new FAX destination. Enter FAX number with the numeric keys. Backspace Add to Addr Book Status Next Dest. Cancel Destination Sub Address Transmission Start Speed ECM Encrypted Transmission On Hook OK 08/08/2009 10:10 FAX Operation (Basic) 2 Enter the fax number of the receiving system using the numeric keys. NOTE: Up to 64 digits can be entered as the fax number of the receiving system. Press [Space] to enter a space. Use [ ] or [ ] to move the cursor. 3 To correct the fax number, press [Backspace] on the touch panel, and delete the digits one by one before reentering the fax number. To delete the number entirely, press the Clear key on the operation panel. When [Add to Addr Book] is displayed, you can register entered contents to the Address Book. [Pause] Pressing this key adds about three seconds of waiting time during dialing. For example, when dialing the receiving system on an external line, you can use this method to insert a pause before resuming dialing after you dial a specific number. 3 If necessary, make any detailed settings. Press each key to change the setting, and press [OK]. NOTE: When On is selected in Entry Check for New Destination, a confirmation screen is displayed for the entered FAX number. Re-enter the same FAX number and press [OK]. For details, refer to Entry Check for New Destination in the Operation Guide for the machine. This setting is available with 30 ppm, 42/52 ppm and 55/50 ppm models. Key Sub Address Transmission Start Speed Description To communicate using the sub address, press this key. For details, refer to Sub Address Communication on page 4-37. To change the transmission start speed, press this key. Select the speed from 33,600 bps, 14,400 bps, and 9,600 bps. OPERATION GUIDE 3-7