Kyocera TASKalfa 420i Fax System (S) C Operation Guide Rev-2 - Page 79
Remote Switch Function, How to Register Remote Switch Dial
View all Kyocera TASKalfa 420i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
FAX Operation (Advanced) Remote Switch Function You can start fax reception by operation from the connected telephone set. This function is convenient for using this machine and a telephone set (commercially available product) in combination installed at places distant from each other. To start fax reception by operation from the connected telephone set, use the following operation. NOTE: In order to use remote switch, it is necessary to connect the tone signal-sending telephone set (commercially available product) to the machine. However, even if it is a tone signal-sending telephone set, this function may not be used satisfactorily depending on the type of telephone set. For details, contact our agent or 4 the store where you purchased this machine. How to Register Remote Switch Dial Remote switch dial is set to 55 at the factory, but you can change the dial number. 1 Press the System Menu key. 2 Press [FAX], [Next] of Reception, [Next] of FAX, and then [Change] of Remote SW Dial. 3 Press [+]/[-] or the numeric keys to enter the number you newly register. (00 to 99) 4 Press [OK]. OPERATION GUIDE 4-15