Kyocera TASKalfa 4501i PRESCRIBE Commands Technical Reference Manual - Rev. 4. - Page 106
Table 6.2., Interface-independent Parameters Sheet 2 of 8
View all Kyocera TASKalfa 4501i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Chapter 6 Permanent Parameters Table 6.2. Interface-independent Parameters (Sheet 2 of 8) Environment Parameter Value Factory setting Serial interface baud H1 rate 3: 300 bps (not valid for some models) 96 6: 600 bps (not valid for some models) 12: 1200 bps 24: 2400 bps 48: 4800 bps 96: 9600 bps 19: 19200 bps 38: 38400 bps 57: 57600 bps 11: 115200 bps Serial interface data bits H2 7 or 8 8 Serial interface stop bits H3 1 or 2 1 Serial interface parity H4 0: None 0 1: Odd 2: Even 3: Ignore Serial interface protocol H5 0: Combination of 1 and 3 below 0 1: DTR, positive true 2: DTR, negative true 3: XON/XOFF 4: ETX/ACK 5: XON/XOFF recognized only as protocol Buffer nearly-full H6 threshold Percentage of the received data buffer size. 90 Buffer nearly-empty H7 threshold Percentage of the received data buffer size. 70 Total host buffer size H8 0 to 99 in units of the size defined by FRPO S5 5 (monochrome model), 10 (monochrome model with network Interface), or 12 (color model) Form feed time-out H9 Value in units of 5 seconds (0 to 99). 6 value Memory card partition I0 reading at power-upb Partition name on a memory card to be read - automatically at power-up. Maximum of 15 printable ASCII characters (20H through 7EH), enclosed in single or double quotation marks. Event log panel menu I1 0: Off 0 1: On Character width I2 0: Normal 0 1: HP LaserJet compatible Sleep timer I5 0: Off 1 1: On End-of-job I7 interpretation for option interface OPT2 Interprets EOJ given by NIC to the following: 0 0: None 1: ^L (0CH) 2: ^D (04H) 3: ^L and ^D 7: ^D and ^L End-of-job I8 interpretation for print server interface Interprets EOJ issued by print server to the 0 following: 0: None 1: ^L (0CH) 2: ^D (04H) 3: ^L and ^D 7: ^D and ^L Reduce/enlarge ratio J0 0: 100% 0 (Models supporting A3 size only) 5: 70% 6: 81% 7: 86% 8: 94% 9: 98% Status send controlc M1 0: Off 0 1: Send printer status. 6-6