Kyocera TASKalfa 4501i PRESCRIBE Commands Technical Reference Manual - Rev. 4. - Page 117
IBM Proprinter Emulation Print Samples, Table 7.3., IBM Proprinter X24E Symbol Sets
View all Kyocera TASKalfa 4501i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
IBM Proprinter X24E Emulation (Mode 1) Table 7.3. IBM Proprinter X24E Symbol Sets Symbol set IBM PC-863 (Canadian French) IBM PC-865 (Norwegian) Message display IBM PC-863 IBM PC-865 FRPO command FRPO U6, 12; FRPO U7, 1; FRPO U6, 13; FRPO U7, 1; By giving a particular value for the U6 and U7 parameters, it is possible to use another symbol set which the Diablo does not have. For details, see LaserJet Symbol Sets on page 37. At power-up or after a reset, the printing system defaults to LetterGothic (12 points, 10 cpi). This default font emulates the IBM printer's Sans-serif 10cpi font. The default font cannot be changed in the IBM Proprinter X24E emulation. (The FRPO C5, C2, and C3 commands will be ignored in the IBM Proprinter X24E emulation.) The printing system also emulates three other IBM-printer fonts: Courier, Prestige Elite, and Courier Proportional (See the table on next page). These fonts can be obtained by embedded commands or by using a printer driver from your word-processing software that supports the IBM Proprinter X24E. No PRESCRIBE commands are needed. An embedded command gives double-wide versions and another give double-high version of all four fonts. Samples are shown on the next page. Figure 7. 4. IBM Proprinter Emulation Print Samples The IBM Proprinter X24E emulation supports embedded commands for doublewide/double-high printing, emphasized printing, double-strike printing, superscripts, 7-5