Kyocera TASKalfa 500ci 500ci/400ci/300ci/250ci Operation Guide Rev-1 - Page 292
System Menu, Auto Image Rotation, EcoPrint, Description
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
Default Setting (System Menu) Use the procedure below to set the default margin width. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of Margin Default. 3 Use the [+] or [-] to enter the margin widths for Left/ Right and Top/Bottom(-0.75 - +0.75). You can use the number keypad to enter the number directly. 4 Press [OK]. Auto Image Rotation Select the default Auto Image Rotation setting. The table below shows the available settings. Item Off On Description No Auto Image Rotation performed. Auto Image Rotation performed. NOTE: Refer to page 4-44 for Auto Image Rotation. Use the procedure below to set the default Auto Image Rotation settings. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of Auto Image Rotation. 3 Select the default for [Off] or [On]. 4 Press [OK]. EcoPrint Select the EcoPrint default. The table below shows the available settings. Item Off On Description No EcoPrint performed. EcoPrint performed. NOTE: Refer to page 4-14 for EcoPrint. Use the procedure below to set the default EcoPrint setting. 8-28 OPERATION GUIDE