Kyocera TASKalfa 500ci 500ci/400ci/300ci/250ci Operation Guide Rev-1 - Page 327
Detailed Adjustment, System Menu, Default Setting System Menu, OPERATION GUIDE,
View all Kyocera TASKalfa 500ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 327 highlights
Default Setting (System Menu) 4 As shown in the illustration, place the printed side down on the platen with the three black boxes aligned to the top. 5 Press [Execute]. The color pattern is read and adjustment begins. 6 The second color pattern is output. Check that the number "2" (to "3") is printed at the bottom of the color pattern and repeat steps 4 to 6 twice to read color patterns 2 and 3 in sequence. 7 Press [OK] in the adjustment end confirmation screen. Detailed Adjustment A total of 5 color pattern pages (No. 1 to 5) are printed during detailed adjustment. As with normal adjustment (page 8-62), the printed color patterns are read sequentially during detailed adjustment. Use the procedure below to carry out detailed adjustment. 1 Press the System Menu key. 8 2 Press [ ], [Adjustment/Maintenance], [ ] and then [Next] of Gray Adjustment. 3 Press [Detail]. 4 Press [Execute]. A color pattern is printed. Check that the number "1" is printed at the bottom of the color pattern. 5 As shown in the illustration, place the printed side down on the platen with the three black boxes aligned to the top. 6 Press [Execute]. The color pattern is read and adjustment begins. 7 The second color pattern is printed. Check that the number "2" (to "5") is printed at the bottom of the color pattern and repeat steps 5 to 7 four times to read color patterns 2, 3, 4 and 5 in sequence. 8 Press [OK] in the adjustment end confirmation screen. OPERATION GUIDE 8-63