Kyocera TASKalfa 5550ci 3050ci/3550ci/4550ci/5550ci Operation Guide Rev-2.2011 - Page 399
RA Stateless Settings, IMPORTANT, DHCP IPv6 Settings, IP Address Stateful
View all Kyocera TASKalfa 5550ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 399 highlights
Default Setting (System Menu) RA (Stateless) Settings Select whether or not to use RA (Stateless). The RA (Stateless) settings are available when selecting [On] for TCP/IP (IPv6). The default setting is On. IMPORTANT: After changing the setting, restart the network from the system menu, or turn the machine OFF and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-103. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Next] of TCP/IP Setting. 3 Press [Next] of IPv6. 4 Press [Change] of RA(Stateless). 5 Press [On] or [Off] of RA (Stateless). When selecting [On], IP Address 1 to 5 (Stateless) appears. 6 Press [OK]. DHCP (IPv6) Settings Select whether or not to use the DHCP (IPv6) server. The DHCP (IPv6) Settings are available when selecting [On] for TCP/IP (IPv6). The default setting is On. IMPORTANT: After changing the setting, restart the network from the system menu, or turn the machine OFF 9 and then ON. For detailed information on restarting the network, refer to Restart Network on page 9-103. Use the procedure below. 1 Press the System Menu key. 2 Press [System], [Next] of Network and then [Next] of TCP/IP Setting. 3 Press [Next] of IPv6. 4 Press [Change] of DHCP. 5 Press [On] or [Off] of DHCP. When selecting [On], IP Address (Stateful) appears. 6 Press [OK]. 9-95