Kyocera TASKalfa 820 TASKalfa 620/820 Print Driver Users Guide Rev 8.1 - Page 36
Basic Paper Settings, Source and Media Types
View all Kyocera TASKalfa 820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Basic 2 Right-click on your printing system icon. 3 Click Printing Preferences. Basic Paper Settings The Basic tab contains several settings for basic printing tasks. Print size This setting sets the size of the area that the printer prints to, regardless of the actual paper size that is used by the printing system. Source This setting specifies the cassette or tray that the printing system draws paper from. Unless you are using a custom paper type, you can leave it set to Auto source selection. Media type This setting selects the Source based on the types of media that are specified in the printing system. In general, you can leave it set to Auto media selection. Destination This setting specifies which output tray is used for the print job output. Orientation This setting specifies the paper orientation of the print job. If Rotated is selected, the print job orientation is rotated 180 degrees. Number of copies This setting specifies the number of copies to print. For collating multiple copies, select Collate. Print on both sides This setting enables duplex printing. EcoPrint This setting makes the entire image, text and graphics, appear lighter in the printed job. EcoPrint does not increase print speed. Note: Some applications may override print settings made in the driver. Usually the application can be set to follow the settings. In Microsoft Word 2007, ensure that Default tray in Options is set to Use printer settings. Source and Media Types In the Basic tab, Source specifies which tray or cassette the printer uses for a printing job. The default is Auto source selection, which instructs the printer to search for the media requested by the application or the printer driver. If the selected tray or cassette empties during a print job, then the printer searches for another source, and continues the job. Media type instructs the printer to search for the type of paper or media that is requested by the application or the printer driver. The choices shown may change depending on the selection in Source. You can use the default, Auto media selection, Custom type or other media types. If Auto media selection is selected, then the printer searches for another tray or cassette using the same media. 4-2 User Guide