LG 15Z90Q-P.AAC8U1 Owners Manual - Page 4

Connecting LAN Adapter, Power Connection, System Shutdown / Power Off, Important Safety Precautions

Page 4 highlights

3 Connecting LAN Adapter ENGLISH Connecting LAN Adapter To connect to the wired LAN, you must purchase a LAN adapter separately. 1 Connect the LAN adapter to the USB-C™ port on the PC. • The USB-C™ port can be used without having to differentiate between the top and bottom surfaces. 2 Connect the network cable (LAN) to the LAN adapter. 3 Check if you can connect to the internet properly. Power Connection The AC adapter is used to power and charge the PC. • Do not use any other AC adapter than the one that was provided when you purchased this product. 1 Connect an end of the cable to the AC adapter and the other end to a power outlet. • The AC adapter can be used from 100 V to 240 V. 2 Connect the AC adapter jack to the PC USB-C™ port. • Ensure that the power jack linked to the AC adapter and product is connected firmly. When the AC adapter is connected, the AC adapter lamp turns on. Status Power Lamp On When the AC adapter is connected and charging is complete. Blinking When the AC adapter is connected and is charging. Off The AC adapter is not connected. • If you try to turn on the system that has entered the Hibernates mode or been turned off after a low-battery alarm, the system will not be turned on but the lamp will blink three times. If this is the case, connect the AC adapter and charge the battery sufficiently before using it. System Shutdown / Power Off Press the [ ] key or [Ctrl] + [ESC] to display the Start menu. -- Press the Start button [ ] > Power button [ ] and select [Shut down]. Important Safety Precautions Check the following 'Important Safety Precautions' to prevent unexpected danger or damage in advance. 'Important Safety Precautions' is divided into 'WARNING' and 'CAUTION.' WARNING: Noncompliance with the instruction may cause serious physical damage or fatal injuries. ! CAUTION: Noncompliance with the instruction may cause minor damage to the body or the machine. While Using the Product WARNING Use batteries certified and acknowledged by LG Electronics Inc. • Otherwise, an explosion or fire may occur. Avoid humidity and heat above 140 °F as in cars or saunas. • Otherwise, an explosion or fire may occur. Keep the battery away from heat. • Otherwise, an explosion or fire may occur. If you find leakage or smell bad odor from the battery, contact the local service center. • Otherwise, an explosion or fire may occur.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

3
Connecting LAN Adapter
ENGLISH
System Shutdown / Power Off
Press the [
] key or [Ctrl] + [ESC] to display the Start menu.
-
Press the Start button [
] > Power button [
] and select [Shut down].
Important Safety Precautions
Check the following ‘Important Safety Precautions’ to prevent unexpected
danger or damage in advance.
‘Important Safety Precautions’ is divided into ‘WARNING’ and ‘CAUTION.’
WARNING
: Noncompliance with the instruction may cause serious
physical damage or fatal injuries.
!
CAUTION:
Noncompliance with the instruction may cause minor damage to
the body or the machine.
While Using the Product
WARNING
Use batteries certified and
acknowledged by
LG Electronics Inc.
• Otherwise, an explosion
or fire may occur.
Keep the battery away from
heat.
• Otherwise, an explosion
or fire may occur.
Avoid humidity and heat
above 140 °F as in cars or
saunas.
• Otherwise, an explosion
or fire may occur.
If you find leakage or smell
bad odor from the battery,
contact the local service
center.
• Otherwise, an explosion
or fire may occur.
Connecting LAN Adapter
To connect to the wired LAN, you must purchase a LAN adapter separately.
1 Connect the LAN adapter to the USB-C™ port on the PC.
• The USB-C™ port can be used without having to
differentiate between the top and bottom surfaces.
2 Connect the network cable (LAN) to the LAN adapter.
3 Check if you can connect to the internet properly.
Power Connection
The AC adapter is used to power and charge the PC.
• Do not use any other AC adapter than the one that was provided when you
purchased this product.
1 Connect an end of the cable to the AC adapter
and the other end to a power outlet.
• The AC adapter can be used from 100 V to 240 V.
2 Connect the AC adapter jack to the PC USB-C™ port.
• Ensure that the power jack linked to the
AC adapter and product is connected firmly.
When the AC adapter is connected, the AC adapter lamp turns on.
Status
Power Lamp
On
When the AC adapter is connected and charging is complete.
Blinking
When the AC adapter is connected and is charging.
Off
The AC adapter is not connected.
• If you try to turn on the system that has entered the Hibernates mode or been
turned off after a low-battery alarm, the system will not be turned on but the
lamp will blink three times. If this is the case, connect the AC adapter and charge
the battery sufficiently before using it.