LG 20LC1RB Owners Manual - Page 16

Installation DTV Setup - To watch digitally broadcast programs, purchase and connect a digital set-top box. Connections Connect the digital set-top box video outputs to the COMPONENT (Y, PB, PR) jacks and connect the digital set-top box audio outputs to the AUDIO jacks. (or, Connect the set-top box with the D-sub output socket to PC INPUT socket on the set and audio cable of the set-top box to the PC SOUND. (15LC1R*)) Viewing Setup 1. Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) 2. Use the INPUT button on the remote control to select Component or RGB-DTV (15LC1R*). COMPONENT (DTV/DVD IN) AUDIO PC INPUT ANT IN ( 75 ) PC SOUND H/P VIDEO IN S-VIDEO Y PB PR (R) AUDIO (L) DTV Receiver (Set-top Box) COMPONENT (DTV/DVD IN) AUDIO PC INPUT ANT IN ( 75 ) PC SOUND H/P VIDEO IN S-VIDEO PC Setup (15LC1R* only) - After setup, be sure to select RGB-PC source on TV. DTV Receiver (Set-top Box) (15LC1R*) RGB-PV OUTPUT AUDIO Connections 1. Set the monitor output resolution on the PC before connecting to the TV. 2. Connect the TV to the PC with the PC cable. 3. Connect the PC audio output to the TV's PC SOUND input. Viewing Setup 1. Turn on the PC. 2. Use the INPUT button on the remote control to select RGB-PC. Monitor Display Specifications MODE Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) VGA 640x480 31.4 60 COMPONENT (DTV/DVD IN) AUDIO PC INPUT ANT IN ( 75 ) PC SOUND H/P VIDEO IN S-VIDEO 800x600 35.1 56 SVGA 800x600 37.8 60 XGA 1024x768 48.3 60 NOTES a. For optimum picture quality, use standard 1024x768@60Hz computer output at a 60Hz refresh rate . Using other formats (VGA, SVGA, etc.) or refresh rates may result in reduced picture quality. (To change the computer video output format, please refer to the operating manual for the computer you are using). b. If the message "Out of range" appears on the screen, adjust the PC output to a format listed in the 'Monitor Display Specifications' chart above. c. The synchronization input form for Horizontal and Vertical frequencies is separate. DPM (Display Power Management) mode If the PC goes to power saving mode, the monitor automatically switches to DPM mode. If you don't use the PC cable provided, DPM mode may not work. 16