LG 32LN540B Owners Manual - Page 15

ENEGNLGISH ASSEMBLING AND PREPARING 15 CAUTION y When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches. y Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.) Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly. Using the Kensington security system (This feature is not available for all models.) The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com. Connect the Kensington security system cable between the TV and a table. NOTE y Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse. Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. Adjusting the angle of the TV to suit view (Only LA61**) Swivel 15 degrees to the left or right and adjust the angle of the TV to suit your view. 10 cm 15 15 10 cm 10 cm 10 cm 2 Connect the power cord to a wall outlet. CAUTION y Do not place the TV near or on sources of heat, as this may result in fire or other damage. CAUTION » When adjusting the angle adof the product, watch out for your fingers. » Personal injury may occur if hands or fingers are pinched. If the product is tilted too much, it may fall, causing damage or injury.