LG 32SE3KE-B User Guide - Page 47

ENGLISH 14. [Mute] (Command: k e) Mutes/unmutes audio. Transmission (k)(e)( )(Set ID)( )(Data)(Cr) Data 00: M ute on (Volume off) 01: M ute off (Volume on) Acknowledgment (e)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 47 17. Clock 2 (Hour/Minute/Second) (Command: f x) Sets the Clock 2 values (hour/minute/second). Transmission (f)(x)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) Data1 00-17: 00-23 hours Data2 00-3B: 00-59 minutes Data3 00-3B: 00-59 seconds * Enter "fx [Set ID] ff" to view the Time 2 (hour/minute/second) settings. * This feature is only available when Clock 1 (year/month/day) has been set. Acknowledgment (x)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x) 15. Volume Control (Command: k f) Adjusts the playback volume. Transmission (k)(f)( )(Set ID)( )(Data)(Cr) Data 00-64: V olume 0-100 Acknowledgment (f)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 16. Clock 1 (year/month/day) (Command: f a) Sets the Clock 1 (year/month/day) values and Auto Time. Transmission 1. (f)(a)( )(Set ID)( )(Data1)( )(Data2)( )(Data3)(Cr) 2. (f)(a)( )(Set ID)( )(0)(0)( )(Data1)(Cr) 1. When setting Clock 1 (year/month/day) Data1 00-: 2 010 Data2 01-0C: January - December Data3 01-1F: 1-31 * The minimum and maximum values for Data1 differ depending on the product's release year. * Enter "fa [Set ID] ff" to view Clock 1 (year/month/day) settings. 2. When Setting Auto Time Data1 00: [Auto] 01: [Manual] * To view the set value of the Auto time, enter "fa [Set ID] 00 ff". Acknowledgment 1. (a)( )(Set ID)( )(OK/NG)(Data1)(Data2)(Data3)(x) 2. (a)( )(Set ID)( )(OK/NG)(0)(0)(Data1)(x) 18. [Daylight Saving Time] (Command: s d) Sets Daylight Savings Time. Transmission (s)(d)( )(Set ID)( )(Data1)( )(Data2)( ) (Data3)( ) (Data4)( )(Data5)( )(Cr) Data1 00: Off (Data2-5: FF) 01: Start Time 02: End Time Data2 01~0C: January - December Data3 01-06: Week 1 - 6 * The maximum value of [Data3] may vary depending on the date. Data4 00-06: (Sunday - Saturday) Data5 00-17: 00 - 23 hours If you wish to read the start/end times, enter FF for parameters [Data2] through [Data5]. (Example 1: sd 01 01 ff ff ff ff - Checks the start time. Example 2: sd 01 02 ff ff ff ff - Checks the end time.) * This feature only works when Clock 1 (year/month/day) and Clock 2 (hour/minute/second) have been set. Acknowledgment (d)( )(Set ID)( )(OK/NG)(Data1)(Data2) (Data3)(Data4)(Data5)(x) * This feature may not be available for all models.