LG 32SE3KE-B User Guide - Page 48
No Signal Power Off] Command: f g
View all LG 32SE3KE-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
ENGLISH 48 19. [No Signal Power Off] (Command: f g) Sets the No Signal Power Off function. Transmission (f)(g)( )(Set ID)( )(Data)(Cr) Data 00: O ff (Not turned off after 15 minutes) 01: O n (Turned off after 15 minutes) Acknowledgment (g)( )(Set ID)( )(OK/NG)(Data)(x) 20. [No IR Power Off] (Command: m n) Activates Auto Power Off when there is no IR signal. Transmission (m)(n)( )(Set ID)( )(Data)(Cr) Data 00: O ff (Not turned off after 2/4/6/8 hours) 01: 2 hours (Turned off after 2 hours) 02: 4 hours (Turned off after 4 hours) 03: 6 hours (Turned off after 6 hours) 04: 8 hours (Turned off after 8 hours) Acknowledgment (n)( )(Set ID)( )(OK/NG)(Data)(x) 21. [Language] (Command: f i) Sets the OSD language. Transmission (f)(i)( )(Set ID)( )(Data)(Cr) Data 00: Czech 01: Danish 02: German 03: English 04: S panish (Europe) 05: Greek 06: French 07: Italian 08: Dutch 09: Norwegian 0A: Portuguese 0B: P ortuguese (Brazil) 0C: Russian 0D: Finnish 0E: Swedish 0F: Korean 10: C hinese (Cantonese) 11: Japanese 12: C hinese (Mandarin) 13: Arabic Acknowledgment (i)( )(Set ID)( )(OK/NG)(Data)(x) * Some languages may not be available for all models. 22. Initial Value Settings (Command: f k) Executes Reset. (Initialize Screen can only be executed in RGB input mode.) Transmission (f)(k)( )(Set ID)( )(Data)(Cr) Data 00: [Picture Reset] 01: Initialize Screen 02: [Reset to Initial Settings] Acknowledgment (k)( )(Set ID)( )(OK/NG)(Data)(x) * This feature may not be available for all models. 23. Current Temperature (Command: d n) Checks the current temperature of the product. Transmission (d)(n)( )(Set ID)( )(Data)(Cr) Data FF: Status Check Acknowledgment (n)( )(Set ID)( )(OK/NG)(Data)(x) * The temperature is displayed in hexadecimal. 24. Key (Command: m c) Sends a key code for the IR remote control. Transmission (m)(c)( )(Set ID)( )(Data)(Cr) Data IR_KEY_CODE Acknowledgment (c)( )(Set ID)( )(OK/NG)(Data)(x) * For key codes, see IR Codes. * Some key codes may not be supported depending on the model.