LG 32TNF5J-B Owners Manual - Page 61
Input Manager], SIMPLINK Setup], Crestron], Transmission, Reception, Send Only, Receive Only
View all LG 32TNF5J-B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
47 ENGLISH [Input Manager] You can set the PC or DTV label for each external input. [SIMPLINK Setup] •• When the [SIMPLINK Setup] is set to [On], you can use the SIMPLINK provided by LG Signage. •• [Device ID]: Set the ID of the device connected via CEC wiring. You can choose a value between [All] and [E]. •• [Standby]: Sets the scenarios for sending and receiving the OpStandBy (0x0c) command. Detailed scenarios are as follows: All Send Only Receive Only Transmission O O X Reception O X O [Crestron] (Depending on model) [Crestron Connected] V1 •• This function enables synchronization with applications provided by Crestron. •• [Server]: This menu sets the server's IP address for the network connection with the server (equipment provided by Crestron). •• [Port] (1024~65535): This menu sets the port for the network connection with the server. The default port number is 41794. •• [IP ID] (3-254): This menu sets a unique ID for synchronizing with the application. [Crestron Connected] V2 •• The connection status of the server type shall be indicated by pictures and phrases. (Disconnected, Connecting, Connected) •• [Type]: You can select the server type you want to connect to (Off, , , ) •• [CONNECT]: If you press the button once, a set tries to connect to the server and the button phrase is changed into [DISCONNECT]. In this case, the upper items are immutable. To disconnect and change upper items, pressing the button again is needed. •• Information for connecting with the server -- [Type]: -- [Server]: Enter the IP information of the server -- [Port]: Enter the Port information for the server -- [IP ID]: A unique ID that distinguishes crestron equipment from server -- [Type]: -- [Room ID]: A unique ID that distinguishes room from server. If the [IP ID] is the same, but the [Room ID] is different, the server recognizes it as a different equipment. -- [Server], [Port], [IP ID] are the same as 's.