LG 37LD340H User Manual - Page 156
Reference, LAN Setup & Overview, POWER, SAVINGS, TV Power On State, TV Standby State, LAN Power
View all LG 37LD340H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 156 highlights
Reference: b-LAN Setup & Overview The b-LAN module is internal to the TV. It allows the hotel/institution head end equipment to communicate, via the institution's RF distribution system, with the TV for configuration and control. Note: MPI cards with b-LAN technology-LMT7Z5, LMT7Z7, LMT7Z9-are NOT supported on TVs in which the b-LAN module is embedded. Power to the b-LAN module is controlled by Installer Menu item 118 POWER SAVINGS. The default value is 003-the b-LAN module is only powered when the TV is turned ON. See chart below. POWER SAVINGS 001 003 (default) 007 TV Standby State b-LAN Power On Off Off TV Power On State b-LAN Power On On Off The control device at the head end, for example, an LG FMA-LG101, can control multiple TVs. When the TV is first installed, it must be turned ON in order for the head end to be able to communicate with the b-LAN. At this point, if it is desired for the b-LAN to always be powered, including while the TV is in Standby, set Installer Menu item 118 POWER SAVINGS to 001. If the embedded b-LAN will not be used, enable maximum power savings in both Standby and TV Power On Mode by setting Installer Menu item 118 POWER SAVINGS to 007. 206-4163 39