LG 55UH6030 Owners Manual - Page 11
Connections Notifications, Connecting to an Antenna or, Cable, Other Connections - refresh rate
View all LG 55UH6030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Connections (Notifications) You can connect various external devices to the TV. Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on an external device's connection, refer to the manual provided with each device. NOTE ••If you record a TV program on a DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device. ••The external device connections shown may differ slightly from illustrations in a manual. ••Connect external devices to the TV regardless about the order of the TV port. ••If you connect a gaming device to the TV, use the cable supplied with the gaming device. ••Refer to the external equipment's manual for operating instructions. ••In PC mode, there may be noise associated with the resolution, vertical pattern, contrast, or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate, or adjust the brightness and contrast on the PICTURE menu until the picture is clear. ••Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly. ••Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. ••The TV may be capable of operating without a set-top from a multichannel video programming distributor (MVPD). Connecting to an Antenna or Cable Connect an antenna, cable, or cable box to watch TV. The illustrations may differ from the actual items and an RF cable is optional. CAUTION ••Make sure not to bend the copper wire of the RF cable. Copper Wire ••Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV. NOTE ••Use a signal splitter to use 2 TVs or more. ••DTV Audio Supported Codec: MPEG, Dolby Digital. ••Direct ULTRA HD broadcast is unavailable in areas without an ULTRA HD signal. ••This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed. (Depending upon model) Other Connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. Depending upon the model, a cable may not be provided. NOTE General > HDMI ULTRA HD Deep Color: -- On : Support 4K @ 60 Hz (4:4:4, 4:2:2, 4:2:0) -- Off : Support 4K @ 60 Hz 8bit (4:2:0) ••If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn't support it, it may not work properly. In that case, connect the device to a different HDMI port or change the TV's HDMI ULTRA HD Deep Color setting to Off. -- This feature is available only on certain models which support HDMI ULTRA HD Deep Color. ••HDMI Audio Supported Format: DTS (44.1 kHz / 48 kHz), AC3 (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz) (Depending upon model) 11 ENGLISH