LG 55VX1D User Guide - Page 60
Power] Command: k a, Select Input] Command: x b, Aspect Ratio] Command: k c, Brightness Control]
View all LG 55VX1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
ENGLISH 60 01. [Power] (Command: k a) Controls the power on/off status of the monitor. Transmission (k)(a)( )([Set ID])( )(Data)(Cr) Data 00: [Off] 01: [On] 02: [Reboot] Acknowledgment (a)( )([Set ID])( )(OK/NG)(Data)(x) * The Acknowledgment signal is returned properly only when the monitor is fully powered on. * There may be a delay between the Transmission and Acknowledgment signals. * This feature may not be supported on some models. 02. [Select Input] (Command: x b) Selects an input signal. Transmission (x)(b)( )([Set ID])( )(Data)(Cr) Data 20: AV 40: COMPONENT 60: RGB 70: DVI-D (PC) 80: DVI-D (DTV) 90: HDMI1 (DTV) A0: HDMI1 (PC) 91: HDMI2/OPS (DTV) A1: HDMI2/OPS (PC) 92: OPS/HDMI3/DVI-D (DTV) A2: OPS/HDMI3/DVI-D (PC) 95: OPS/DVI-D (DTV) A5: OPS/DVI-D (PC) 96: HDMI3/DVI-D (DTV) A6: HDMI3/DVI-D (PC) 97: HDMI3/HDMI2/DVI-D (DTV) A7: HDMI3/HDMI2/DVI-D (PC) 98: OPS (DTV) A8: OPS (PC) C0: DISPLAYPORT (DTV) D0: DISPLAYPORT (PC) E0: SuperSign webOS Player E1: Others E2: Multi Screen E3: Play via URL Acknowledgment (b)( )([Set ID])( )(OK/NG)(Data)(x) * Some input signals may not be available with certain models. * webOS Player is processed as NG when the content is not saved. 03. [Aspect Ratio] (Command: k c) Adjusts the aspect ratio of your monitor. Transmission (k)(c)( )([Set ID])( )(Data)(Cr) Data 02: [Full Wide] 06: [Original] Acknowledgment (c)( )([Set ID])( )(OK/NG)(Data)(x) * The aspect ratio may differ depending on the model's input configuration. 04. [Brightness Control] (Command: j q) Sets the brightness of your monitor. Transmission (j)(q)( )([Set ID])( )(Data)(Cr) Data 00: [Off] 01: [Minimum] 02: [Medium] 03: [Maximum] 04: [Automatic] 05: [Screen Off] Acknowledgment (q)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 05. [Picture Mode] (Command: d x) Selects a picture mode. Transmission (d)(x)( )([Set ID])( )(Data)(Cr) Data 00: [Mall/QSR] 01: [General] 02: [Gov./Corp.] 03: [Transportation] 04: [Education] 05: [Expert 1] 06: [Expert 2] 08: [APS] 09: [Photo] 11: [Calibration] Acknowledgment (x)( )([Set ID])( )(OK/NG)(Data)(x) * Depending on the model, some picture modes may not be supported.