LG 55VX1D User Guide - Page 66
Natural Mode] In Tile Mode Command: d j
View all LG 55VX1D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
ENGLISH 66 33. [Backlight] (Command: m g) Adjusts the backlight brightness. Transmission (m)(g)( )([Set ID])( )(Data)(Cr) Data 00 to 64: [Backlight] 0 to 100 Acknowledgment (g)( )([Set ID])()(OK/NG)(Data)(x) 34. [Screen Off] (Command: k d) Turns off/off the screen. Transmission (k)(d)( )([Set ID])( )(Data)(Cr) Data 00: Screen On 01: Screen Off Acknowledgment (d)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 35. [Tile Mode] (Command: d d) Sets a tile mode and values for the tile rows and columns. Transmission (d)(d)( )([Set ID])( )(Data)(Cr) Data 00 to FF: the first byte - tile column The second byte - tile row * 00, 01, 10, and 11 mean that the tile mode is off * The maximum value may differ depending on the model. Acknowledgment (d)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. * Video wall models require to be rebooted for the normal operation after the values are changed. 36. Check [Tile Mode] (Command: d z) Checks the tile mode. Transmission (d)(z)( )([Set ID])( )(Data)(Cr) Data FF: Checks [Tile Mode] Acknowledgment (z)( )([Set ID])( )(OK/NG)(Data1)(Data2)(Data3)(x) Data1 00: [Tile Mode] Off 01: [Tile Mode] on Data2 00 to 0F: tile column Data3 00 to 0F: tile row * This feature may not be supported on some models. 37. [Tile ID] (Command: d i) Sets the tile ID value of the product. Transmission (d)(i)( )([Set ID])( )(Data)(Cr) Data 01 to E1: [Tile ID] 1 to 225 FF: Checks the [Tile ID] * The data value cannot exceed the value of row x column. Acknowledgment (i)( )([Set ID])( )(OK/NG)(Data)(x) * If you enter a value that exceeds the value of row x column for the Data parameter, Ack becomes NG. * This feature may not be supported on some models. * Video wall models require to be rebooted for the normal operation after the values are changed. 38. [Natural Mode] (In Tile Mode) (Command: d j) To display the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted. Transmission (d)(j)( )([Set ID])( )(Data)(Cr) Data 00: [Off] 01: [On] Acknowledgment (j)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models.