LG 60PA6550 Owners Manual - Page 49

EXTERNAL CONTROL DEVICE SETUP 9 ENEGNLGISH 12. OSD Select (Command: k l) To select OSD (On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: OSD off Data 01: OSD on Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 13. Remote Control Lock Mode (Command: k m) To lock the remote control and the front panel controls on the set. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00: Lock off Data 01: Lock on Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] If you're not using the remote control and front panel controls on the Monitor set, use this mode. When main power is on/off, remote control lock is released. If Key Lock is on in the standby mode, TV will not turn on by POWER button of remote control and on the TV. 14. Balance (Command: k t) To adjust balance. You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to "Real data mapping". Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] 15. 3D (Command: x t) (For 3D TV) To change 3D mode for TV. Transmission [x][t][ ][Set ID][ ][Data01] [ ][Data02][ ][Data03][ ][Data04][Cr] Data1 00: 3D On 01: 3D Off 02: 3D to 2D 03: 2D to 3D Data2 00: Top and Bottom 01: Side by Side 02: Check Board 03: Single Frame Sequential 04: Column interleaving 05: Row interleaving Data3 00: Right to Left 01: Left to Right Data4 3D Depth: Min : 00 ~ Max : 14 (*transmit by Hexadecimal code) *If data1 is 01(3D Off) , data2 , data3 , data4 have no meaning. *If data1 is 02(3D to 2D), data2, data3 and data4 have no meaning. *If data1 is 03(2D to 3D), data2 and data3 have no meaning. Data 01 00 01 02 03 Data 02 o x x x Data 03 o x x x Data 04 x x x o x : Don't care Acknowledgement [t][ ][OK][Data01][Data02] [Data03][Data04][x][t][ ][NG][Data01][x] 16. Color Temperature (Command: x u) To adjust color temperature. You can also adjust color temperature in the PICTURE menu. Transmission [x][u][ ][Set ID][ ][Data][Cr] Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal code) *Refer to "Real data mapping". Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 17. Extended 3D (Command: x v) (For 3D TV) To change 3D option for TV. Use the feature depending on your model. Transmission [x][v][ ][Set ID][ ][Data01][ ][Data02][Cr] Data1: 3D option 00: 3D Picture Correction 01: 3D Depth 02: 3D Viewpoint 07: 3D Sound Zooming 08: Normal Image View 09: 3D Mode Data2: It has own range for each 3D option determined by Data1. 1) When Data1 is 00 00: Right to Left 01: Left to Right 2) When Data1 is 01 Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal code) 3) When Data1 is 02 Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal code) 4) When Data1 is 07 00: Off 01: On 5) When Data1 is 08 00: Off 01: On 6) When Data1 is 09 00: Standard 01: Sports 02: Cinema 03: Extreme 04: Manual Acknowledgement [v][ ][OK][Data01][Data02][x] [v][ ][NG][Data01][x] * Use the feature depending on your model. 18. ISM Method (Command: j p) To avoid having a fixed image remain on screen. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 02: Orbiter 08: Normal 20: Color Wash Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 19. Energy Saving (Command: j q) To control the energy saving function. Transmission [ j ][q][ ][Set ID][ ][Data][Cr] Data 00: off