LG 65SM5KD Owners Manual - Page 109
Remote Control/Local Key Lock Command: k m, Fail Over] Input Select Command: m j
View all LG 65SM5KD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
ENGLISH 39. [Energy Saving] Settings (Command: f j) Sets the Display Power Management feature. Transmission (f)(j)( )([Set ID])( )(Data)(Cr) Data 00: [Off] 04: 1 minute 05: 3 minutes 06: 5 minutes 07: 10 minutes Acknowledgment (j)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 67 42. [Fail Over] Select (Command: m i) Sets an input mode for fail over. Transmission (m)(i)( )([Set ID])( )(Data)(Cr) Data 00: [Off] 01: [Auto] 02: [Custom] Acknowledgment (i)( )([Set ID])( )(OK/NG)(Data)(x) 40. Remote Control/Local Key Lock (Command: k m) Adjusts the remote control/local key (front) lock. Transmission (k)(m)( )([Set ID])( )(Data)(Cr) Data 00: [Off] (Lock Off) 01: [On] (Lock On) * When the monitor is turned off, the power key works even in On (01) mode. Acknowledgment (m)( )([Set ID])( )(OK/NG)(Data)(x) * This feature may not be supported on some models. 41. [Power On Delay] (Command: f h) Sets the schedule delay for when the power turns on (unit: seconds). Transmission (f)(h)( )([Set ID])( )(Data)(Cr) Data 00 to FA: min. 0 to max. 250 (seconds) Acknowledgment (h)( )([Set ID])( )(OK/NG)(Data)(x) * The maximum value may differ depending on the model. 43. [Fail Over] Input Select (Command: m j) Selects an input source for fail over. * This feature is only available when Fail Over is set to Custom. Transmission (m)(j)( )([Set ID])( )(Data1)( )(Data2)( )(Data3)( ) (Data4) ... ( )(DataN)(Cr) Data1 to N (input priority 1 to N) 60: RGB 70: DVI-D 90: HDMI1 91: HDMI2 92: OPS/HDMI3/DVI-D 95: OPS/DVI-D 96: HDMI3/DVI-D 97: HDMI3/HDMI2/DVI-D 98: OPS C0: DISPLAYPORT Acknowledgment (j)( )(SetID)( )(OK/NG)(Data1)(Data2)(Data3)(Data4) ... (DataN)(x) * Some input signals may not be available with certain models. * The data number (N) may vary depending on the model. (The data number depends on the number of supported input signals.) * This feature operates as the last input, and supports data in DTV format.