LG AF115 Owner's Manual - Page 19

Connection Connecting to a DVD Player * Depending on the equipment, the component output jacks (Y, PB, PR) of the DVD Player may be labeled as Y, Pb, Pr/Y, B-Y, R-Y/ Y, Cb, Cr. < How to connect > Component cable a. Connect the DVD Player component cable to the Y, PB and PR of the COMPONENT IN of the projector. * When connecting the component cable, match the jack colors with the component cable.(Y=green, PB=blue, PR=red) (R) AUDIO (L) Y PB PR b. You may use HDMI instead of component if available on the DVD player. HDMI supports better quality than component. Signal 480i 480p 720p 1080i 1080p 576i 576p Component O O O O O O O HDMI X O O O O X O Connecting to a D-TV Set-Top Box * To receive Digital TV (D-TV) programs, it is necessary to purchase a D-TV receiver (Set-Top Box) and connect it to the projector. * Please refer to the owner's manual of the D-TV Set-Top Box for the connection between projector and D-TV Set-Top Box. < How to connect a HDMI source > a. Connect the HDMI IN of the projector and the HDMI output port of the DTV set-top box with an HDMI cable. b. Set the DTV receiver's resolution to one of the following: 480p(576p)/720p/1080i/1080p mode. (R) AUDIO (L) HDMI OUTPUT DTV OUTPUT DVI OUTPUT Y PB PR HDMI Cable < How to connect a Component source > a. Connect the component cable connected to the DTV set-top box to the Y, PB and PR of the COMPONENT IN of the projector. * When connecting the component cable, match the jack colors. (Y=green, PB=blue, PR=red) Component cable (R) AUDIO (L) DTV OUTPUT DVI OUTPUT Y PB PR 19