LG AN-MR200 User Manual - Page 3
Rf Specification, Rf Dongle, Installing Rf Dongle - device remote control
View all LG AN-MR200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
3 RF DONGLE Use LED LCD TV/LCD TV Only. PDP Model (50/60PZ95/75/57**) don't need this device. PDP TV is built in. 3 Attach the RF Dongle to the velcro as shown below and then turn on the TV. Cable IN Lamp INSTALLING RF DONGLE Image shown may differ from your TV. 1 Locate the designated Velcro attachment location on the TV. Then tear off the protection paper and attach the Velcro. (The attachment location is different depending on the TV model you own) Velcro *If the RF Dongle for the wireless media box is attached, attach the RF Dongle for the Magic Motion remote control on the below right of the back of the TV. *To avoid wireless interference, keep the distance between the RF Dongle and the Wi-Fi dongle at 20 cm. 20cm or *Attach the RF Dongle aligning with the upper left corner bracket. 2 Connect the RF Dongle Cable plug on the RF Dongle to a USB1 jack on the TV. RF SPECIFICATION The Magic Motion Remote Control communicates with RF Dongle using a 2.4 GHz bandwidth radio frequency (RF). ꔛ Output: 1 dBm or lower ꔛ Maximum Communication Distance: 10 m (32.8 ft) in an open space ꔛ Bandwidth: 2.4 GHz (2.4035 GHz - 2.4783 GHz) ꔛ Transfer Rate: 250 kbps 86%