LG AN-MR200 User Manual - Page 4

4 REGISTERING PRECAUTIONS TO TAKE The Magic Motion Remote Control operates by pairing with your TV. ENTER OK How to register the Magic Motion Remote Control To register the remote control, press the ENTER (or OK) button on the remote control while aiming it at your TV. ENTER OK MUTE How to Re-register the Magic Motion Remote Control after Registration Failure Reset the remote control by pressing and holding both the ENTER (or OK) and MUTE buttons for 5 seconds. (Once the reset is complete, the light on the Pointer blinks.) Then repeat the above procedure to register the remote control. HOW TO USE ENTER OK Press ENTER (or OK) button if there is no pointer on your TV screen. The pointer will appear on the screen. If the pointer has not been used for a certain period of time, it will disappear. You can move the pointer by aiming the front of the remote control at your TV then move it left, right, up or down. If the pointer does not work properly after clicking the ENTER (or OK) button, wait for 10 seconds then use it again. ꔛ Use the remote control within the maximum communication distance (10 m, 32.8 ft). Using the remote control beyond this distance, or with an object obstructing it, may cause a communication failure. ꔛ A communication failure may occur due to nearby devices. Electrical devices such as a microwave oven or wireless LAN product may cause interference, as this will use the same bandwidth (2.4 GHz) as the Magic Motion Remote Control. ꔛ The Magic Motion Remote Control may be damaged or may malfunction if it is dropped or receives a heavy impact. ꔛ When playing a game using the Magic Motion Remote Control, hold it securely by wrapping its strap around your wrist and adjusting the length with the adjustable ring. ꔛ Take care not to bump into nearby furniture or other people when using the Magic Motion Remote Control. ꔛ It is recommended that your wireless access point be located more than 1 m (3.28 ft) away from the TV. If the AP is installed closer than 1 m, the magic motion remote control may not perform as expected due to frequency interference.