LG AS330DWR0 Owners Manual - Page 13

Unpacking the Appliance Unpack the appliance and remove any packing tape or vinyl before using the appliance. Removing the Filter Packaging 1 Remove the rear cover by gently pulling the top of the cover at the sides until it separates from the appliance. Lift the cover to remove it from the base. • The rear cover has "PM1.0 & GAS SENSOR" printed on it. EN 4 Install the filter in the appliance. • Make sure that the handle Insert space before parenthesis. (a) is at the top of the filter. 5 Insert the tabs at the bottom of the cover into the slots in the base of the appliance and close the cover. 2 Remove and dispose of the cardboard support piece (a) located by the filter inlet. 3 Slide the filter out and remove it from its packaging. NOTE • Remove the support and packaging prior to use to prevent product malfunction. • Install the filter with the handle at the top to avoid product malfunction or failure. 13