LG CRD-8482B Owners Manual - Page 7
Installing the Drive - cd rom
View all LG CRD-8482B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Installing the Drive Before installing the drive, turn off the system power. Follow the steps below to install the CD-ROM drive: 1. Remove the cover from your computer system. Refer to manual for the computer for details about removing the cover. 2. Insert the CD-ROM drive unit into a free 5.25-inch drive bay. Secure the CD-ROM drive to the drive bay rails with the mounting screws (supplied). 3. Connect the 4-pin power cable and 40-pin IDE interface cable to the back of the CD-ROM drive. DAIUGDITIAOL DG AANUADLIOOG RG L CS M S LA 39 40 INTERFACE 1 2 +5POGWNDE+R12 Power Cable Audio Cable IDE cable Red Strip Notes: If there is no spare power cable available in the computer, you will have to purchase a splitter cable of a suitable type. The red edge of the IDE cable corresponds to pin 1 of the IDE interface on the CD-ROM drive. Please Note: an IDE cable is not supplied and may be required to be purchased separately. If the computer is using a sound card, the drive is connected to the sound card with an audio cable. This CD-ROM drive is supplied with a Creative Labs SoundBlaster© compatible audio lead, if this is not suitable for your sound card, it maybe necessary for you to purchase a suitable lead from your retailer. Refer to the manual for the sound card for detailed information regarding connection. E-7