LG D2342P User Manual - Page 15

CUSTOMIZING SETTINGS 15 ENEGNLGISH SUPER ENERGY SAVING Settings 1 Press any button on the front of the Monitor set to display the MONITOR SETUP OSD menu. 2 Press the MENU button to display the options in the OSD menu. 3 Select SUPER ENERGY SAVING by pressing the buttons on the front of the Monitor set and set the options. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. SUPER ENERGY SAVING ON OFF RESET SUPER SAVING : 5 W/h LED SAVING : 12 W/h TOTAL POWER REDUCTION: 20 W TOTAL CO2 REDUCTION: 16 g OK EXIT The available picture settings are described below. Menu ON OFF RESET Description Enables SUPER ENERGY SAVING you can save energy with this energy-efficient function. Disables SUPER ENERGY SAVING. Resets the values of total energy consumption reduction and CO2 emission reduction estimates. NOTE yyTOTAL POWER REDUCTION: How much power is saved while using the monitor. yyTOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2. yySAVING DATA(W/h) 584 mm (23 inch) SUPER SAVING 5 W/h LED SAVING 12 W/h yySaving Data depends on the Panel. So,those values should be different from each panel and panel vendor. yyLG calculated these values by using "broadcast video signal". yyLED Saving refers to how much power can be saved using a WLED Panel instead of CCFL panel. yySUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function.