LG DLG3601V Owners Manual - Page 56

56 TROUBLESHOOTING Steam Functions (Steam Models) Problem Water drips from nozzle when STEAM CYCLE starts Garments still wrinkled after Steam Fresh™ Creases or pleats are gone from garments after Steam Fresh™ Garments have static after using the Reduce Static option Garments are too damp or too dry after using the Reduce Static option Steam does not generate, but no error code is shown Water drips from door during STEAM CYCLE Steam is not visible during STEAM CYCLE Drum does not turn during STEAM CYCLE Cannot see steam vapor at the beginning of cycle Odors remain in clothing after Steam Fresh™ Possible Cause This is normal. Too many or overly different types of garments in dryer. The function of this cycle is to remove wrinkles from fabric. This is normal. Correct drying options not selected. Water level error. This is normal. This is normal. This is normal. This is normal. Steam Fresh™ did not remove odor completely. Solutions ••This is steam condensation. The dripping water will stop after a short time. ••Small loads of 1 to 5 items work best. Load fewer garments. Load similar types of garments. ••Use an iron to replace creases and pleats in garments. ••The amount of static experienced will depend on the individual moisture level in the skin. ••Select the load weight manually before starting the Reduce Static option. ••Unplug dryer and call for service. ••Condensation will normally form on the inside of the dryer door during steam operation. Some condensation may drip out the bottom of the door. ••Steam vapor is difficult to see when the door is closed. However, condensation will normally form on the inside of the dryer door if the steam system is operating normally. ••The drum is turned off so that the steam vapor remains in the drum. The drum will normally turn for about 2 seconds once a minute. ••Steam is released at different stages of the cycle for each option. ••Fabrics containing strong odors should be washed in a normal cycle.