LG DLG5932S User Guide - Page 29

Rack Dry, Beeper, Bacterial, Custom Program - reset button

Page 29 highlights

Troubleshooting Tips Operating Instruction Installation Instructions Safety Instructions FEATURES AND BENEFITS RACK DRY The dryer rack is shipped in place in your dryer. Remove and discard any packing material before use. Use the RACK DRY for items that you do not want to tumble dry, such as sweaters. When you use the heated dryer rack, the heated air inside the dryer flows in a concentrated pattern to allow efficient and uniform drying. Use RACK DRY to select the desired time. To use the RACK DRY: Do not remove the lint screen. 1. Open dryer door. 2. Place dryer rack over the bottom of the dryer door opening. Rest the rack on the dryer back ledge. Push down on the frame front to secure over lint screen. 3. Place wet items on top of the rack. Allow space around items for air to circulate. The rack does not move, but the drum will rotate. Make sure items do not hang over the edges or between rack grill. ANTI BACTERIAL This option can only be used with the HEAVY DUTY, COTTON/TOWELS and NORMAL cycles. This option reduces certain types of bacteria. The ANTI BACTERIAL process produces high temperature during the cycle. NOTE: Do not use this cycle on delicate fabrics. CUSTOM PROGRAM Set up your favorite combination of settings and save them here for one-touch recall. To store a CUSTOM PROGRAM. 1. Select a cycle 2. Change DRY LEVEL and TEMP. CONTROL. 3. Select OPTIONS you want. 4. Press and hold the CUSTOM PROGRAM. To recall your stored CUSTOM PROGRAM Press CUSTOM PROGRAM pad, then press START/PAUSE. 4. Close the door. 5. Select RACK DRY and MORE TIME or LESS TIME. Reset time as needed to complete drying. Refer to the following table. 6. Select the desired temperature setting to match the fabrics in your load by pressing TEMP. CONTROL (Air Dry-Ultra Low-Low). Items containing foam, rubber, or plastic must be dried on a clothesline or by using the Air Dry temperature setting. Refer to the following table. 7. Start the dryer. To remove the dryer rack, lift it straight up and out of the dryer. BEEPER The BEEPER controls the volume of the beep that is made when you press any of the buttons on the control panel and the termination of any cycle is indicated. Press BEEPER to adjust the sound level or turn off the signal. NOTE: Check the lint screen and remove any lint accumulated from items dried on the rack. Suggested Items for Rack Drying Temperature Suggested Setting Time* (Minutes) Washable wool items (block to shape and lay flat on rack) Stuffed toys (cotton or polyester fiber filling) Stuffed toys (foam rubber filled) Foam rubber pillows Tennis shoes Low 20 Low/Ultra Low 20/30 Air Dry/Ultra Low 50/30 Air Dry 50 Air Dry 20 * Reset time as needed to complete drying. Customer Service 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

28
Safety Instructions
Installation Instructions
Operating Instruction
Troubleshooting Tips
Customer Service
FEATURES AND BENEFITS
RACK DRY
BEEPER
The dryer rack is shipped in place in your dryer.
Remove and discard any packing material before
use.
Use the RACK DRY for items that you do not want to
tumble dry, such as sweaters. When you use the
heated dryer rack, the heated air inside the dryer
flows in a concentrated pattern to allow efficient and
uniform drying. Use RACK DRY to select the desired
time.
To use the RACK DRY:
Do not remove the lint screen.
1
. Open dryer door.
2
. Place dryer rack over the bottom of the dryer door
opening. Rest the rack on the dryer back ledge.
Push down on the frame front to secure over lint
screen.
3
. Place wet items on top of the rack. Allow space
around items for air to circulate. The rack does not
move, but the drum will rotate. Make sure items do
not hang over the edges or between rack grill.
4
. Close the door.
5
. Select RACK DRY and MORE TIME or LESS
TIME. Reset time as needed to complete drying.
Refer to the following table.
6
. Select the desired temperature setting to match
the fabrics in your load by pressing
TEMP.
CONTROL (Air Dry-Ultra Low-Low). Items
containing foam, rubber, or plastic must be dried
on a clothesline or by using the Air Dry
temperature setting. Refer to the following table.
7
. Start the dryer.
To remove the dryer rack, lift it straight up and out
of the dryer.
The BEEPER controls the volume of the
beep that is
made when you press any of the buttons on the
control panel and
the termination of any cycle is
indicated.
Press BEEPER to adjust the sound level or turn off
the signal.
ANTI
BACTERIAL
This option can only be used with the HEAVY DUTY,
COTTON/TOWELS and NORMAL cycles.
This option reduces certain types of bacteria. The
ANTI BACTERIAL
process produces high
temperature during the cycle.
NOTE:
Do not use this cycle on delicate fabrics.
CUSTOM PROGRAM
Set up your favorite combination of settings and save
them here for one-touch recall.
To store a CUSTOM PROGRAM.
1. Select a cycle
2. Change DRY LEVEL and TEMP. CONTROL.
3. Select OPTIONS you want.
4. Press and hold the CUSTOM PROGRAM.
To recall your stored CUSTOM PROGRAM
Press CUSTOM PROGRAM pad, then press
START/PAUSE.
NOTE
: Check the lint screen and remove any lint
accumulated from items dried on the rack.
* Reset time as needed to complete drying.
Suggested Items
for Rack Drying
Temperature
Setting
Suggested
Time*
(Minutes)
Washable wool items
(block to shape and lay
flat on rack)
Stuffed toys (cotton or
polyester fiber filling)
Stuffed toys (foam
rubber filled)
Foam rubber pillows
Tennis shoes
Low
Low/Ultra Low
Air Dry/Ultra Low
Air Dry
Air Dry
20
20/30
50/30
50
20