LG DLGX2902V Owner's Manual - Page 38

LG DLGX2902V Manual

Get LG DLGX2902V PDF manuals and user guides View all LG DLGX2902V manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

BEFORE CALLING FOR SERVICE (cont.) Problem Steamdoesn't generate but no error code is shown. Garments still wrinkled after STEAMFRESH™. There are no creases left on garment after STEAMFRESH™. Garments have static after REDUCE STATIC. Garments are too damp or too dry after REDUCESTATIC. Garments are not uniformly damp after EASYIRON. Water drips from door duringSteamCycle. Steamisnotvisible duringSteamCycle. Drum does not turn duringSteamCycle. Cannot see steam vapor at the beginning of cycle. The display shows . Odors remain in clothing after STEAMFRESH™. FLOWSENSE indicator light is on during the drying cycle Possible Causes • Water level error. • Too many or too different types of garments in dryer. • The function of this cycle is to remove wrinkles from fabric. • This is normal. Solutions • Unplug dryer and call for service. • Small loads of 1 to 5 items work best. • Load fewer garments. Load similar-type garments. • Use an iron to make creases. • Depends on individual moisture level in skin. • Correct drying options not selected. • This is normal. • Select load weight manually before starting REDUCE STATIC option. • Depends on the amount or type of garments. • This is normal. • This is normal. • This is normal. • This is normal. • This is steam condensation on door surface. • Steam vapor is difficult to see when the door is closed. • The drum is turned off so that the steam vapor remains in the drum. • Steam is released at different stages of the cycle for each option. • Pressing the MORE TIME button several times will set the cycle for a large load such as a comforter. • Fabrics containing strong odors should be washed in a normal cycle. • Install a shorter or straighter duct run. See the Installation Instructions. • uctwork should be checked/cleaned soon. D Dryer can be used in this condition, but drying times may be longer. • MORE TIME button pressed. • STEAMFRESH™ did not remove odor completely. • Ductwork is too long or has too many turns/restrictions. • Significant blockage of the ductwork due to lint buildup or debris. 38

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
FLOW±SENSE±
indicator light is on
during the drying
cycle
• Ductwork is too long or has
too many turns/restrictions.
• Significant blockage of the
ductwork due to lint buildup
or debris.
•
Install a shorter or straighter duct run. See the
Installation Instructions.
•
Ductwork should be checked/cleaned soon.
Dryer can be used in this condition, but drying times
may be longer.
BEFORE CALLING FOR SERVICE
(cont.)
Problem
Possible Causes
Solutions
Steam±doesn’t±
generate but no error
code is shown.
• Water level error.
• Unplug dryer and call for service.
Garments still
wrinkled after
STEAMFRESH
™
.
• Too many or too different
types of garments in dryer.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
There are no creases
left on garment after
STEAMFRESH
™
.
• The function of this cycle
is to remove wrinkles from
fabric.
• Use an iron to make creases.
Garments have
static after REDUCE
STATIC.
• This is normal.
• Depends on individual moisture level in skin.
Garments are too
damp or too dry after
REDUCE±STATIC.
• Correct drying options not
selected.
• Select load weight manually before starting
REDUCE STATIC option.
Garments are not
uniformly damp after
EASY±IRON.
• This is normal.
• Depends on the amount or type of garments.
Water drips from door
during±Steam±Cycle.
• This is normal.
• This is steam condensation on door surface.
Steam±is±not±visible±
during±Steam±Cycle.
• This is normal.
• Steam vapor is difficult to see when the door is
closed.
Drum does not turn
during±Steam±Cycle.
• This is normal.
•
The drum is turned off so that the steam vapor
remains in the drum.
Cannot see steam
vapor at the
beginning of cycle.
• This is normal.
•
Steam is released at different stages of the cycle
for each option.
• MORE TIME button pressed.
Odors remain in
clothing after
STEAMFRESH
™
.
• STEAMFRESH
™
did not
remove odor completely.
• Fabrics containing strong odors should be
washed in a normal cycle.
The display shows
.
•
Pressing the MORE TIME button several times will
set the cycle for a large load such as a comforter.
38