LG DLGX7188RM Owner's Manual (English) - Page 37

Problem, Possible Causes, Solutions, cont.

Page 37 highlights

TROUBLESHOOTING BEFORE CALLING FOR SERVICE (cont.) Problem Possible Causes Water drips from nozzle when Steam Cycle starts. Steam doesn't generate but no error code is shown. Garments still wrinkled after Steam Fresh™. There are no creases left on garment after Steam Fresh™. Garments have static after REDUCE STATIC. • This is normal. • Water level error. • Too many or too different types of garments in dryer. • The function of this cycle is to remove wrinkles from fabric. • This is normal. Garments are too damp or too dry after REDUCE STATIC. Garments are not uniformly damp after EASY IRON. Water drips from door during EASY IRON. • Correct drying options not selected. • This is normal. • This is normal. Steam is not visible • This is normal. during Steam Cycle. The drum does not turn during Steam Cycle. Cannot see steam vapor at the beginning of cycle. The display shows • This is normal. • This is normal. • MORE TIME button pressed. Top plate of the dryer is very warm. Odors remain in clothing after STEAM FRESH™. • This is normal. • STEAM FRESH™ did not remove odor completely. Solutions • This is steam condensation. The dripping water will stop after a short time. • Unplug dryer and call for service. • Small loads of 1 to 5 items work best. • Load fewer garments. Load similar-type garments. • Use an iron to make creases. • Depends on individual moisture level in skin. • Select load weight manually before starting REDUCE STATIC option. • Depends on the amount or type of garments. • This is steam condensation on door surface. • Steam vapor is difficult to see when the door is closed. • The drum is turned off so that the steam vapor remains in the drum. • Steam is released at different stages of the cycle for each option. • Pressing the MORE TIME button several times will set the cycle for a big load such as a comforter. • The top plate of the dryer will get warm during steam functions. • Fabrics containing strong odors should be washed in a normal cycle. 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Problem
Possible Causes
Solutions
BEFORE CALLING FOR SERVICE
(cont.)
Water drips from
nozzle when Steam
Cycle starts.
• This is normal.
• This is steam condensation. The dripping water
will stop after a short time.
Steam doesn’t
generate but no error
code is shown.
• Water level error.
• Unplug dryer and call for service.
Garments still
wrinkled after
STEAM FRESH
.
• Too many or too different
types of garments in dryer.
• Small loads of 1 to 5 items work best.
• Load fewer garments. Load similar-type garments.
There are no creases
left on garment after
STEAM FRESH
.
• The function of this cycle
is to remove wrinkles from
fabric.
• Use an iron to make creases.
Garments have
static after REDUCE
STATIC.
• This is normal.
• Depends on individual moisture level in skin.
Garments are too
damp or too dry after
REDUCE STATIC.
• Correct drying options not
selected.
• Select load weight manually before starting
REDUCE STATIC option.
Garments are not
uniformly damp after
EASY IRON.
• This is normal.
• Depends on the amount or type of garments.
Water drips from
door during EASY
IRON.
• This is normal.
• This is steam condensation on door surface.
Steam is not visible
during Steam Cycle.
• This is normal.
• Steam vapor is difficult to see when the door is
closed.
TROUBLESHOOTING
The drum does not
turn during Steam
Cycle.
• This is normal.
• The drum is turned off so that the steam vapor
remains in the drum.
Cannot see steam
vapor at the
beginning of cycle.
• This is normal.
• Steam is released at different stages of the cycle
for each option.
The display shows
• MORE TIME button pressed.
• Pressing the MORE TIME button several times will
set the cycle for a big load such as a comforter.
Top plate of the dryer
is very warm.
• This is normal.
• The top plate of the dryer will get warm during
steam functions.
Odors remain in
clothing after
STEAM FRESH
.
• STEAM FRESH
did not
remove odor completely.
• Fabrics containing strong odors should be
washed in a normal cycle.
²¶